Eaton Bussmann Authorized Distributor | Certificate No. 56 | Valid Through: December 31, 2026

Building Distribution

Building distribution uses a UL class fuse that matches the block already in the panel. Class J, L, RK1, RK5, T, CC, CF, G, and H do not interchange. GODZ lists the Bussmann series families for feeder and branch circuits, plus the switches and panelboards that mount them.

01

Footprint, then amps

A class J fuse will not seat in a class R block. Class T is a different body again, and it is used where the panel depth is tight. Read the class from the block before reading the amp rating.

02

Feeder versus supplemental

Feeder and branch fuses are the UL class families. One-time, in-line, and midget supplemental fuses are branch-circuit accessories. They do not replace a class J feeder fuse.

03

Switches and panels

Safety switches, enclosed disconnects, CCP switches, the coordination panelboard, and power distribution blocks are the equipment around the fuse. The fuse rating still comes from the conductor.

Fuses and devices for this application

Full range: UL Feeder Fuses, UL Branch Circuit Fuses

Buyer questions

Questions buyers ask

Which class is a current-limiting feeder fuse?

Class J, CC, CF, T, RK1, and L are current-limiting classes used on feeders and branches. Class H is not current limiting. Confirm the block before substituting.

What current range is published for class J?

Class J on this site is published at 600 Vac / 300 Vdc, 1 A to 600 A, UL 248-8. Class L covers 601 A to 6000 A.

Are Edison series fuses listed here?

Edison series class fuses are a separate range. This page lists the Bussmann series families used in the same class of block.

Online RFQ Inquiry

Fill in your requirements. Our engineer will provide a quotation within 1 working day.
Bulk inquiry with BOM list is supported.